First Choice KME6 - Installation and Site Preparation; Site Preparation Guidelines

SITE PREPARATION
 REMOVE THE PROTECTIVE PLASTIC COATING FROM THE OVEN
 CLEAN UNIT WITH SOAPY WATER
 1 x WATER CONNECTION WITH ¾ VALVE
(UNIT SUPPLIED WITH 1 x Y PIECE CONNECTOR)
(AND 2 x ¾ HOSES)
 A DRAIN PIPE WITH TRAP – 1½” Dia (38mm)
 ELECTRICAL SUPPLY REFER TO TECHNICAL DATA
 PLEASE RECORD YOUR MACHINE SERIAL NO. HERE,
THIS WILL HELP IN THE FUTURE FOR SERVICING.
SERIAL No. ____________________
DATE OF PURCHASE ____________________