What to do if First Degree Fitness Equipment Viking Rower computer does not illuminate after battery installation?
If the First Degree Fitness Equipment Viking Rower computer screen doesn't illuminate after installing batteries, ensure the batteries are correctly positioned. If the LCD screen remains dark, try slightly rotating the batteries. If issues persist, the batteries may need replacing.
Why does the water in my First Degree Fitness Equipment rower change color or become cloudy?
If the water in your First Degree Fitness Equipment rower changes color or becomes cloudy, it may be due to direct sunlight exposure or lack of water treatment. To resolve this, relocate the rower to reduce direct sunlight exposure. Also, add water treatment and blue dye, or change the tank water as directed in the water treatment section of this manual. Poor local tap water quality may also cause this issue.
Why is the First Degree Fitness Equipment rower belt slipping off the belt/bungee pulley?
If the rower belt on your First Degree Fitness Equipment is slipping off the belt/bungee pulley, it could be due to insufficient bungee tension or weak recoil. To fix this, tighten the bungee cord following the instructions in the "reattaching the rower belt" section of this manual.
What to do if First Degree Fitness Equipment Viking Rower computer screen illuminates, but does not register when rowing?
If the First Degree Fitness Equipment Viking Rower computer screen illuminates but doesn't register when rowing, there may be a loose or failed connection. Check that the computer lead is properly connected.
General| Brand | First Degree Fitness |
|---|---|
| Model | Viking Rower |
| Category | Fitness Equipment |
| Language | English |
Lists all components included in the hardware kit for assembly.
Details the steps for adding chlorine and blue dye for water maintenance.
Provides advice on using the siphon for efficient tank filling.
Explains how to adjust the heel support for optimal foot placement.
Guidance on frequency and duration for rowing sessions.
Explains the functions and display of the rowing computer.
Details the different modes and settings available on the computer.
Step-by-step guide on how to remove the rowing belt.
Instructions for correctly installing and securing the rowing belt.
Lists conditions and damages not covered by the warranty.
Outlines the terms and requirements for warranty claims.
To Next Page
