First Solar 7 Series - Regulatory Compliance

To Next Page

To Previous Page

FIRST SOLAR First Solar Series 7 FT1 Module - USER GUIDE 4 of 22

FIRST SOLAR, INC. | MPD-00810-07-IN REV 1.0

3 REGULATORY COMPLIANCE

It is the responsibility of the installer and/or system integrator to ensure compliance with all local structural

and electrical codes, which may be applicable to the installation and use of First Solar Series 7 FT1

modules.

Series 7 FT1 modules are tested and certified per IEC 61730-1/IEC 61730-2 and meet Class II

requirements for 1500 VDC systems.

Series 7 FT1 modules are tested and certified per IEC 61215-1/IEC 61215-1-2/IEC 61215-2 for a

maximum system voltage of 1500 VDC.