6
and Key
Icon>
2.5
seconds
Accesses Remote Option Menu. See Remote Option Menu Table for details.
Function Button Menu
Button Duration
<Insert Lock
Icon>
<Insert Unlock Icon>
<Insert
Trunk
Icon>
<Insert
Key/Start
Icon>
<Insert
Function
Icon>
One Tap
Drive Lock
On/Off
Turbo Timer On/Off Auxiliary 1 Auxiliary 2
Remote Option Menu Table
Feature
Turns Feature
On or Off
Button
Duration
Remote
Chirp(s)
Function / Description
Enter and Exit
Remote Menu
<insert Trunk
+ Key button
icon>
2.5
Seconds
Three On |
Three Off
Enters and Exits Remote Option Menu. The LED will flash purple.
2 Way Paging
Display
<insert Lock
icon>
Half
second
One-Half
Paging | Two-
Full Paging
Determines whether your remote is used for Alarm or Start Only
system. Set it to FULL for ALARM IT and MAX IT features. Set to
HALF for START IT ONLY systems. If on, LED will flash blue.
When turned off, the LED will flash red twice.
Important: The 2W902R-SP is defaulted in HALF for START IT
systems. It must be changed to FULL for alarm systems.
Silent
<insert Unlock
icon>
Half
second
One On | Two
Off
Turns the silent mode on or off. If on, LED will flash blue. When
turned off, the LED will flash red twice.
2
nd
Car Mode
<insert Trunk
icon>
Half
second
One On | Two
Off
Puts your remote into 2
nd
Car Mode. You can control another
vehicle with the same remote as long as it has the same RF Kit
installed. If on, LED will flash blue. When turned off, the LED will
flash red twice.
Automatic Button
Lock
<insert
Key/Start
icon>
Half
second
One On | Two
Off
Locks all buttons on the remote automatically after one minute.
Tap any button then the button(s) you would like to use to send a
command from the remote to your vehicle. If on, LED will flash
blue. When turned off, the LED will flash red twice.
Remote LED Functions and Descriptions
Your remote will communicate to and from your vehicle while in range. The LED will change colors
indicating transmission, confirmation, remote start run time and error confirmations.
Event LED Color LED Duration Chirp(s)
Runtime Remaining:
100 Percent
Blue Once every 5 seconds Six times
Runtime Remaining:
66 Percent
Purple Once every 5 seconds N/A
Runtime Remaining:
33 Percent
Red Once every 5 seconds N/A
All command
confirmations
Blue Once or Twice depending on function
Once or Twice
depending on
function
All error
confirmations
Red Three LED flashes Three chirps
To Next Page
Loading...
Need help?
General
