Firstech CM-2300 User Manual

Manual De Instalación
de Firstech LLC, Version: 1.0
Aplicable a los siguientes sistema de alarma:
CM-2300 – Modulo de Control de
Alarma/Apertura
Este dispositivo cumple con la Parte 15 de las normas de la FCC. funcionamiento está sujeto a las siguientes
condiciones;
(1) Este dispositivo no puede causar interferencias perjudiciales.
(2) Este dispositivo puede aceptar cualquier interferencia recibida, incluidas las que puedan provocar un
funcionamiento no deseado.
PRECAUCIÓN: Los cambios o modificaciones que no hayan sido expresamente aprobados por la parte
res
p
onsable del cum
p
limiento
p
ueden anular la autoridad del usuario
p
ara utilizar este dis
p
ositivo.
techfeed.compustar.com
Installation Manual
By Firstech LLC, Version: 1.0
Applicable to the following alarm system:
CM-2300 – Alarm/Keyless Control Module
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions;
(1) This device may not cause harmful interference.
(2) This device may accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate this device.
techfeed.compustar.com

Firstech CM-2300 Specifications

General

Brand	Firstech
Model	CM-2300
Category	Car Alarm
Language	English

Summary

Product Overview and Compliance

FCC Compliance Information

Describes FCC rules and conditions for device operation, including interference guidelines.

Product Identification

Identifies the product as Firstech CM-2300 Alarm/Keyless Control Module.

Introduction

Kit Contents

Lists the basic components included in the CM-2300 alarm/keyless system package.

Installation Basics

Key Installation Points

Highlights important considerations before beginning the installation process.

Remote Code Routines

Explains the procedure for programming remotes to the control module.

Component Placement and Use

Guides on critical placement and usage of system components for optimal performance.

Common Procedures

Valet Mode, Jumpers, and Firmware

Details on operating Valet mode, configuring jumpers, and updating module firmware.

CM-2300 Wiring Schematic

CM-2300 Wire Chart

Main, Lock, and 8-Pin Harnesses

Wiring details for CN1 (Main Harness), CN2 (Lock Harness), and CN3 (8-Pin Harness).

Connector Wiring Details

Shock Sensor, LED, Antenna, and RS232 Connectors

Wiring specifications for CN4, CN5, CN6, and CN7 connectors.

Option Programming Tables

Option Menu Descriptions

Lock/Unlock Pulse, Driver Priority, Ignition Locks

Configuration for door lock pulse duration, priority unlock, and ignition-based locking.

Siren Duration & Confirmation Chirps

Settings for siren sound duration and audible confirmation chirp volume.

Auto Rearm & Passive Arming

Options for automatic system rearming and passive arming activation.

Dome Light Delay & Valet Mode

Settings for dome light delay and Valet mode activation methods.

Door Notification & Factory Alarm/Mute

Features for door open alerts, factory alarm integration, and remote mute control.

How to Program Options

Remote Programming Methods

Covers quick change sequences and programming with compatible remotes.

OP500 Programmer Usage

Instructions for using the FT-OP500-KIT Option Programmer.

Troubleshooting

Alarm LED Diagnostics

Interpreting LED flash patterns to diagnose alarm trigger causes.

Frequently Asked Questions

Technical Support Contacts