FISCHBEIN
®
Co. MODEL PBC-6000™
OPERATOR’S MANUAL
REV. D 2005-03
1
TABLE OF CONTENTS
Page
1. INTRODUCTION………………………………………………………………………………….. 3
1.1 General Safety Precautions ……………………………………………………………. 4
1.2 Safety Statement…………………………………………………………………………… 4
1.3 Revision Changes…………………………………………………………………………… 4
2. WARRANTY STATEMENT……………………………………………………………………… 4
3. WARNINGS …………………………………………………………………………………………. 4
4. COMMON APPLICATIONS OF THE PBC 6000……………………………………… 5
4.1 System Illustration………………………………………………………………………… 6
4.2 System Characteristics…………………………………………………………………… 7
4.3 Accessories and Options………………………………………………………………… 9
5. INSTALLATION……………………………………………………………………………………. 10
5.1 Recommended Work Area Layout…………………………………………………… 10
5.2 Site and System Preparation………………………………………………………….. 10
5.3 Unpacking Procedure…………………………………………………………………….. 11
6. ON LINE PREPARATION ……………………………………………………………………… 13
6.1 Safety Guidelines…………………………………………………………………………… 13
6.2 Electrical System…………………………………………………………………………… 13
6.3 Pneumatic System…………………………………………………………………………. 14
6.4 Leveling and Centering…………………………………………………………………… 14
6.5 Speed Checks and Synchronization…………………………………………………. 16
6.6 Folder ………………………………………………………………………………………….. 17
6.7 Compression Belts and Rollers………………………………………………………… 17
6.8 Setting the Temperature………………………………………………………………… 18
6.8.1 Determining the Correct Temperature…………………………………. 18
6.8.2 Using the Temperature Controller……………………………………….. 19
7. OPERATING THE PBC 6000………………………………………………………………… 20
7.1 Process Description………………………………………………………………………. 20
7.2 Operating the PBC 6000
(START UP PROCEDURE)
………………………. 22
7.3 Shutdown Procedure……………………………………………………………………… 23
To Next Page
Need help?
General