EasyManua.ls Logo

FISCHBEIN Saxon SH 2000 User Manual

FISCHBEIN Saxon SH 2000
69 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SH2000
HOT AIR CONTINUOUS HEAT SEALER
INSTRUCTION
AND
MAINTENANCE
MANUAL
FISCHBEIN-SAXON LTD
Incorporating The Thames Packaging Equipment Company and Fischbein Ltd
Alexandra Business Centre, 274 Alma Road, Enfield, Middlesex, EN3 7RS, England
Telephone: +44 (0) 844 3722 877 Fax: +44 (0) 844 3722 876
Manual No 82.150 Rev 100315

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the FISCHBEIN Saxon SH 2000 and is the answer not in the manual?

FISCHBEIN Saxon SH 2000 Specifications

General IconGeneral
BrandFISCHBEIN
ModelSaxon SH 2000
CategoryFood Saver
LanguageEnglish

Summary

Safety Information

Expert Maintenance Procedures

Technical Data

Machine Controls Overview

Machine Control Panel Layout

Identifies and labels the control panel components for different configurations.

Setting Up Procedures

Throughput Speed Adjustment

Guides on synchronizing machine speed with conveyor for optimal sealing.

Machine Positioning and Alignment

Instructions for leveling and aligning the machine with the conveyor.

Temperature Adjustment

Describes how to check, increase, or decrease the working temperature.

PID Controller Autotune Function

Detailed step-by-step guide for performing the PID autotune function.

Changing Bag Thickness Settings

Explains how bag thickness affects pressure wheel gap and requires adjustment.

Pressure Wheel Adjustment Guide

Step-by-step guide for adjusting pressure wheels for bag thickness.

Temperature Adjustment for Bag Thickness

How to modify temperature settings based on bag material thickness.

Setting Heater Capsule Height

Procedure for setting the correct height of heater capsules.

Pressure Wheel Alignment

Steps to ensure parallel alignment and correct height of pressure wheels.

Maintenance Procedures

Removing Heating Capsule

Instructions for safely removing a heating capsule.

Replacing Heater Capsule

Step-by-step guide for replacing a heating capsule.

Changing Heater Module

Procedure for replacing the entire heater module assembly.

Replacing Motor or Gearbox

Instructions for replacing the motor or gearbox unit.

PID Controller Fault Diagnosis

How to diagnose common PID controller failures.

PID Controller Replacement

Steps for replacing a faulty PID controller unit.

Routine Maintenance Schedules

Daily Maintenance Checks

Daily checks for cleanliness and safety switch functionality.

Weekly Maintenance Checks

Weekly maintenance checks, including belt tension and wear inspection.