Need help?Do you have a question about the Fisher & Paykel 836848 and is the answer not in the manual?
General| Brand | Fisher & Paykel |
|---|---|
| Model | 836848 |
| Category | Water Filtration Systems |
| Language | English |
Ensure professional installation adhering to local plumbing codes for safe water connection.
Avoid extreme temperatures (below 33°F/0.6°C or above 100°F/38°C) and hot water lines.
Install a water hammer arrester if needed to protect the system from pressure surges.
Purchase replacement filter cartridges online at fisherpaykel.com or via Customer Care.
Twist the cartridge counter-clockwise to detach from the filter head. Minor water may drip.
Remove protective cap, align, twist clockwise to lock. Crucially, flush the filter post-installation.
Access via toe kick grille. Use tool to turn filter 90° counter-clockwise and pull out.
Remove caps, align, push, rotate head 90° clockwise to lock. Ensure to flush the filter.
Ensure appliance is powered and cooled. Follow all flushing steps for optimal filter performance.
Dispense 1 gallon of water, wait 4 minutes, repeat. Expect initial water drips.
Turn on the ice maker, cycle the ice tray. Discard the first full bin of ice.
After replacing the filter, press specific buttons for 4 seconds to reset the indicator.
To Next Page