product and surrounding cabinetry. See minimum
clearance in cabinetry dimensions table.
C. Adjust the front feet down until the refrigerator is
leaning backward with the front approximately
10mm higher than the back. This will ensure a
good door closing action.
(Non French door models only)
D. Aligning your refrigerator with cabinetry.
• Align the sides of the refrigerator with the
cabinetry by adjusting the hinge side front foot.
• Adjust the handle side foot until it touches the
floor and takes a small amount of weight.
• Once the refrigerator is in place and aligned with
cupboards/alcove gently push on the front top
and check if the product is rocking or stable.
Uneven door alignment
https://producthelp.fisherpaykel.com/au/Cool/Fridges/Bottom_Freezer/Without_Ice_and_Water/790mm/RF522BRPX6/User_G…
Updated: Mon, 27 Apr 2020 00:46:14 GMT
Powered by
14
To Next Page
Loading...
