Why does the water from my Fisher & Paykel ActiveSmart RF522A Refrigerator have a poor taste or odour?
If the water from your Fisher & Paykel Refrigerator has a poor taste or odour, especially if the refrigerator hasn't been used for an extended period, dispense 10 liters of water to replenish the fresh water supply.
Why is my Fisher & Paykel ActiveSmart RF522A not working?
Your Fisher & Paykel Refrigerator might not be working because there is no electricity at the power outlet. Check that the plug is correctly connected and the power is switched on. Also, you can check another appliance at the same outlet or check the house fuse.
What to do if my Fisher & Paykel ActiveSmart RF522A ice maker does not work?
If the ice maker on your Fisher & Paykel Refrigerator isn't working, there are a few possible reasons: the ice maker might not be switched on, so turn it on. The bin might be incorrectly placed or missing, so place the bin with the scoop on the right side. The water supply might be off or disconnected, so connect the water supply.
What to do if the water dispenser is not working on my Fisher & Paykel ActiveSmart RF522A?
If the water dispenser on your Fisher & Paykel Refrigerator isn't working, first ensure the water supply is turned on and properly connected. Press the dispenser for 2 minutes to remove trapped air from the water line and fill the system. Check the supply line for any kinks or leaks, and if it's a new installation, run 3 liters of water through the dispenser to remove air. Also, verify that the DISPENSER LOCK is not activated by pressing and holding the button for 4 seconds. If these steps don't resolve the issue, the filter may be blocked and need replacement.
Why does my Fisher & Paykel Refrigerator water dispenser not work?
If the water dispenser on your Fisher & Paykel Refrigerator isn't working, it could be due to a couple of reasons. If the refrigerator hasn't been used for a while, dispense 4L of water to replenish the fresh water supply. Also, ensure that the water supply is turned on.
Why doesn't the tray or bin slide in and out evenly in my Fisher & Paykel ActiveSmart RF522A?
If a tray or bin in your Fisher & Paykel Refrigerator doesn't slide in and out evenly, check for any food or packaging trapped behind it. Also, the runners may not be extending fully; hold the sides of the tray or bin and firmly pull to fully extend and reset the runner.
Why is there ice buildup inside the freezer compartment of my Fisher & Paykel ActiveSmart RF522A Refrigerator?
Ice buildup inside the freezer compartment of your Fisher & Paykel Refrigerator often indicates that the freezer door isn't closing tightly. Arrange items in the freezer to allow the door to close properly, and check and clean the door gasket seal.
What to do if the door is not closing on my Fisher & Paykel ActiveSmart RF522A?
If the door of your Fisher & Paykel Refrigerator isn't closing, first check for any obstructions blocking it and remove them. If you have a soft-closing door model, the soft-closing feature may have failed, which is not serviceable by the user.
Why is there condensation on the outside of my Fisher & Paykel Refrigerator/freezer?
Condensation on the outside of your Fisher & Paykel refrigerator or freezer is not unusual during periods of high humidity. Simply wipe it dry.
Why are ice cubes freezing slowly in my Fisher & Paykel ActiveSmart RF522A Refrigerator?
Slow ice cube freezing in your Fisher & Paykel Refrigerator can occur if the door has been left ajar. Ensure the door is closed properly. Also, if the freezer compartment is too warm, turn the temperature to a colder setting.
General| Brand | Fisher & Paykel |
|---|---|
| Model | ActiveSmart RF522A |
| Category | Refrigerator |
| Language | English |
Outlines essential safety measures and precautions for appliance use.
Covers safe electrical practices, plug handling, and cord maintenance.
Details safe food storage practices and advice during power outages.
Specifies electrical connection and ideal placement for the refrigerator.
Instructions for connecting the water supply for Ice & Water models.
Provides necessary clearance and ventilation for proper installation.
Step-by-step guide for installing the water filter kit for Ice & Water models.
Covers physical installation, door alignment, and leveling the appliance.
Instructions on how to stabilize the unit if it is not level.
Details on how to change the door swing direction if needed.
How to adjust temperatures and use the internal control panel.
Managing audible alarms and door open notifications.
Explains how to use rapid chilling and freezing functions.
Explains the meaning of icons on the external display.
How to use the water dispenser and activate the lock function.
Step-by-step guide for replacing the water filter.
Instructions on how to reset the filter replacement reminder.
How to turn the ice maker on and prepare it for first use.
Using the function to increase ice production speed.
Explains the humidity control lid and slide for produce storage.
Details on slim drawers, bottle holders, glass shelves, and drip tray.
Instructions for manual ice making and storage.
How to clean the exterior, interior, and specific parts like the drip tray.
Guide to cleaning and reassembling the humidity control system.
Steps for removing and reinstalling drawers and trays.
Advice on selecting, storing, and preserving fresh food.
Guidance on freezing food for optimal quality and duration.
What to do when fault icons illuminate or alarms sound.
Explains common sounds the refrigerator may make during operation.
Common issues and solutions applicable to all models.
Problems and solutions unique to Ice & Water functionality.
Details what the warranty covers and what it excludes.
Information specific to consumer rights in Australia.
Steps to take before calling for service or support.
Phone numbers, websites, and addresses for customer support.
Information required when requesting service or assistance.
To Next Page
