Fisher & Paykel ACTIVESMART - Safety and Warnings; Dual Installation

3
1 SAFETY AND WARNINGS
Dual installation refers to the joining of 1 x RS91WR model with 1 x RS91WL model or
1 x RS36WR model with 1 x RS36WL model.
2 DUAL INSTALLATION
RS91WR MODELS RS91WL MODELS
RS91WRJ FP RS91WLJ FP
RS91WRU FP
RS36WR MODELS RS36WL MODELS
RS36W80RJ FP
RS36W80LJ FP
RS36W80RU FP
RS36WRJC DCS RS36WLJC DCS
RS36WRUC DCS
This booklet refers to left hinge and right hinge products.
IMPORTANT!

Each refrigerator requires a water supply and shut off valve. Use a solid brass type splitter
if both refrigerators are supplied from the one water supply.

Ensure the dual power outlet is suitable for two right angled plugs.

Extension cords should not be used in the dual installation.
IMPORTANT!
For correct and complete installation of your refrigerator(s) follow the ‘Installation
guide’ booklet supplied with your refrigerator. This booklet is supplementary providing
instructions which are unique to dual installation.
!
WARNING!
This appliance is top-heavy and must
be secured to prevent the possibility of
tippingforward.
To ensure that the appliance is stable under
all loading conditions, theanti-tip bracket and
fittings supplied must be installed according
tothe following installation instructions by a
professional installer.
IMPORTANT!
SAVE THESE INSTRUCTIONS
The models shown in this installation guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please go to
our website www.fisherpaykel.com or www.dcsappliances.com or contact your local Fisher & Paykel dealer.