10
1
Load dishes
Remove all food scraps and load the dishes.
2
Add detergent
3
Check rinse agent
4
Press the button
5
Select a wash program
The length of the wash program will appear
on the electronic display (models with LCD
only).
6
Select (optional)
7
Check
Ensure there is nothing obstructing the
spray arm. The drain filter must be level with
the filter plate.
8
Start
Close the drawer and press the
button.
9
Finish
The DishDrawer® will beep six times to
indicate the end of the wash program. At
the end of the wash program the drying fan
will continue to run for a set time or until the
drawer is opened. The fan assists with drying
and uses negligible amounts of energy. It
is normal for some water to remain in the
drain filter area after the wash program is
complete.
Double models only: At the end of a wash
program, you may find both drawers
draining simultaneously. This is normal.
1
7
4
5
8
6
2
3
Operating instructions - Operation
US CA
To Next Page
Loading...
Need help?
General
