Why is the water dispenser not working on my Fisher & Paykel E522BLXU2?
- LLaura HoffmanNov 22, 2025
If the water dispenser on your Fisher & Paykel refrigerator isn't working, here are a few things to check: * Ensure the water supply is turned on and properly connected. After turning on the water, press the dispenser for about 2 minutes to eliminate any trapped air and fully fill the water system. * Inspect the supply line for any kinks or leaks that may be blocking the water flow. If it's a new installation, there might be air in the system. To resolve this, dispense a liter or quart of water through the dispenser. * A blocked filter can also cause issues, so consider replacing the filter. * Make sure the dispenser lock isn't activated by holding down the button for 2 seconds. * If the water in the tank has frozen, try increasing the temperature in both the fresh food compartm...








