Fisher & Paykel E522BRX - Ventilation and Cabinetry Dimensions

7
EN
Installation - Four Essential Requirements
4. Ventilation and Installation
To ensure adequate ventilation for your
refrigerator or freezer see recommended
cabinetry dimensions below.
The appliance is intended to be placed against a
wall with a free distance not exceeding 3” (75mm).
If building the appliance into a cupboard, follow
installation instructions provided with the
integration kits.
Flush with refrigerator chassis
– full door rotation
Flush with refrigerator door
– full door rotation
Flush with refrigerator door
– 90˚ door rotation
Cabinetry dimensions (inches / mm) (including minimum clearances)
E522B
A inside height
68 ¾ / 1745
Flush with refrigerator chassis – full door rotation
B inside width
32 ¾ / 830
C inside depth
24 ⁄ / 620
Flush with refrigerator door – 90º door rotation
D inside width
32 ⁄ / 835
E inside depth flush to curved door 26 ⁄ / 675
F inside depth flush to flat door
27 ⁄ / 690
Flush with refrigerator door – full door rotation
G inside width
37 ⁄ / 950
H inside depth flush to curved door 26 ⁄ / 675
I inside depth flush to flat door
27 ⁄ / 690
Minimum clearances
J side clearance
¾ / 20
K side clearance – hinge side flush with door – 90° rotation 1 / 25
L side clearance – hinge side flush with door – full rotation 5 ½ / 140
M rear clearance (incl. evaporator tray) 1 ⁄ / 30
N vent 2 / 50