Fisher & Paykel WH8060F User Guide

12
WH8560P2, WH8060P2 and WH7560P models
1
Power Press to turn the washer ON/OFF.
2
Keylock Press to disable all buttons on the control panel, except the
POWER button. This prevents accidental button presses.
3
SmartTouch™
Control Dial
Rotate to select your desired wash cycle.
z
Red LED illuminates to indicate the selected wash cycle.
4
Digital display
screen
Shows the following:
z
TIME TO GO – the remaining time in the cycle that is
currently running.
z
Delayed start time of wash cycle.
z
Notifications if an error is detected or a warning is necessary.
5
Progress lights Indicate the current status of the wash cycle.
z
All lights are illuminated at the start of the wash cycle.
z
The light of the current status flashes, and then turns off
oncecompleted.
6
Delay Start
Less/More
Press
MORE to increase andLESS to decrease the delay
start time.
7
Wash Temp Press to increase or decrease wash water temperature.
8
Spin Speed Press to increase or decrease spin speed.
9
Soil Level Press to select the level of soil in your load.
!0
Wash Boost Press to select PRE WASH or RINSE+.
!1
Options Press to select ECO and/or WRINKLE FREE.
!2
Add a Garment Press to interrupt the wash part of the cycle to add or remove
agarment.
!3
Start/Pause Press to start or pause the selected wash cycle.
CONTROL PANEL
1
2 4
3
7 8 9
5
!0 !1 !2
!3
6

Fisher & Paykel WH8060F Specifications

General

Brand	Fisher & Paykel
Model	WH8060F
Category	Washer
Language	English