How to reset Fisher & Paykel WH80F60W Washer if the programme is unable to be started?
If your Fisher & Paykel Washer programme is unable to be started or selected, the machine may have switched to self-protection mode because of an infrastructure problem, such as line voltage or water pressure issues. To resolve this, reset your machine by pressing the START/PAUSE button for 3 seconds.
What to do if there is water coming from the bottom of my Fisher & Paykel WH80F60W?
If you notice water coming from the bottom of your Fisher & Paykel Washer, it could be due to a problem with the inlet hose, drain hose, or the pump filter. Start by checking the seals at both ends of the water inlet hose. Make sure the filters are free from any blockages and are properly secured. Also, ensure the drain hose is securely and directly connected to the wastewater standpipe or tub. Finally, remove the service door and confirm that the pump filter is completely closed.
General| Model | WH80F60W |
|---|---|
| Type | Front Load Washer |
| Capacity | 8 kg |
| Water Rating | 4.5 Stars |
| Spin Speed | 1400 RPM |
| Dimensions (H x W x D) | 850 x 600 x 600 mm |
| Depth | 600 mm |
| SmartDrive Technology | Yes |
| Number of Programs | 12 |
| Weight | 70 kg |
| Color | White |
| Wash Cycles | 12 |
| Energy Rating | 4 Stars |
To Next Page