Fisher & Paykel WH80F60W Series User Manual

6
Installation instructions
Inlet hoses
Important!
The appliance must be connected to the cold water mains using the new hose supplied. Old hoses
should not be reused.

Connecting the hose:
1
Connect the straight end of the inlet hose to the tap. There are washers fitted to both ends.
2
Connect the elbow end of the inlet hose to the inlet valve on the back of the machine.
The cold inlet valve is marked in blue.
Fig.3 Connection of the inlet hose to the machine

Fisher & Paykel WH80F60W Series Specifications

General

Brand	Fisher & Paykel
Model	WH80F60W Series
Category	Washer
Language	English