• Turn to remove the seat peg from
the frame.
• Insert the seat into the slot in the frame.
• Replace the seat peg and turn to secure.
Hint: You can adjust the seat height (higher
or lower) for your child's comfort. Simply
remove the seat peg and lift or lower the
seat. Replace the seat peg to secure the seat.
Seat
Assembly
1
4
This product contains
small parts in its
unassembled state. Adult
assembly is required.
CAUTION
• Turn the cycle upside down.
• Identify the front base (wide) and the rear
base (narrow).
• Fit the front base (wide) into the groove
in the front of the frame.
Hint: The front base is designed to fi t easily
into the groove in the frame. If it does not
fi t, turn the base around so that it curves
away from the seat.
• Insert two #10 x 1
1
/2" long screws
through the tube in the front base
and tighten.
Front Base
(Wide)
2
Seat Peg
To Next Page
Loading...
Need help?
General
