Fisher-Price smart cycle - Assembly Tip Manual

Assembly Tip
Please follow these instructions carefully to properly assemble the pedals to the Smart Cycle
™
.
• Locate the left pedal marked with an L on the outside end.
• Fit the threaded end of the left pedal into the hole in the left
pedal axle marked with an L.
• Hand-tighten the pedal by turning it COUNTER-CLOCKWISE.
• Fit the end of the assembly tool to the groove in the end
of the pedal.
• Turn the assembly tool COUNTER-CLOCKWISE to fully
tighten the pedal.
• Fit the end of the assembly tool to the groove in the end
of the pedal.
• Turn the assembly tool CLOCKWISE to fully tighten
the pedal.
Left Pedal
Right Pedal
Assembly Tool
Your Smart Cycle includes a left and right pedal along with an assembly tool.
You must use the assembly tool to attach the pedals.
• Fit the threaded end of the right pedal (marked with an R)
into the hole in the right pedal axle (also marked with an R).
• Hand-tighten the pedal by turning it CLOCKWISE.
L R
C
o
u
n
t
e
r
-
C
l
o
c
k
w
i
s
e
C
l
o
c
k
w
i
s
e
L R
C
o
u
n
t
e
r
-
C
l
o
c
k
w
i
s
e
C
l
o
c
k
w
i
s
e
1
2
3
4
TM