Fisher-Rosemount HART Communicator User Manual

116 pages

To Next Page

HART

Communicator

MAN 4275A00

PN: 00275-8026-0001

English

July 2000

Advanced Test Equipment Rentals

www.atecorp.com 800-404-ATEC (2832)

Questions and Answers:

D
Diane MckinneyAug 2, 2025
What to do if there is noise or signal distortion from the control system on Fisher-Rosemount HART Communicator Cell Phone?
- R
  rachelnicholsonAug 2, 2025
  If you're experiencing noise or signal distortion from the control system affecting your Fisher-Rosemount Cell Phone, try isolating the device. Disconnect the field wiring and power the loop using an external power supply along with a 250-ohm resistor. Check if communication returns with this setup. If it does, use an oscilloscope to check for noise or signal distortion from the control system, paying attention to the 800 Hz to 10 KHz range with an amplitude of 0.5Vpp or larger. Note that larger amplitudes below 800 Hz or above 10 KHz may also affect communication.
M
Matthew LeeAug 11, 2025
Why is there noise on the field loop of my Fisher-Rosemount HART Communicator Cell Phone?
- T
  Trevor ParkerAug 11, 2025
  If you are experiencing noise on the field loop of your Fisher-Rosemount Cell Phone, ensure that the field wiring shield is grounded at only one end. Typically, the shield should be grounded at the control system and floating at the field device.

Fisher-Rosemount HART Communicator Specifications

General

Brand	Fisher-Rosemount
Model	HART Communicator
Category	Cell Phone
Language	English

Summary

The HART Communicator

HART Communicator Connections

Details on how to connect the HART Communicator to devices via its rear panel.

Liquid Crystal Display (LCD)

Description of the HART Communicator's 8-line by 21-character display.

Action Keys

Explanation of the function of the six blue, white, and black action keys.

Alphanumeric and Shift Keys

Details on the keypad layout and data entry functions.

Menu Navigation and Structure

Guide to understanding the HART Communicator's menu system and navigation.

Main Menu and Offline Operations

Accessing and navigating the Main and Offline menus for device configuration.

New Configuration (Offline)

Process for creating a custom device configuration offline.

Saved Configuration Menus

Managing and accessing stored device configurations from memory.

Online Menu and Device Interaction

Navigating the Online menu and interacting with connected devices.

Utility Menu Functions

Accessing and using utility functions for the Communicator settings.

Hot Key Customization

Customizing the Hot Key menu for quick access to frequently performed tasks.

Servicing the HART Communicator

Procedures for maintenance and component replacement.

Battery Pack Management

Instructions for changing alkaline batteries and recharging NiCad packs.

Memory Module and Data Pack Management

Procedures for replacing memory modules and data packs.

Common Tasks for Fisher-Rosemount HART Devices

Powering Up and Online Menu

Steps to power up the communicator and access the Online menu.

Device Setup Menu Navigation

Overview of the Device Setup menu and its options.

Basic Setup and Detailed Setup

Accessing and configuring basic and detailed device parameters.

Fast Key Sequences

Using numerical key sequences for quick task access.

Menu Trees

Model 54pH/ORP Transmitter Menu Tree

Menu structure for the Model 54pH/ORP Transmitter.

Model 1151 Pressure Transmitter Menu Tree

Menu structure for the Model 1151 Pressure Transmitter.

Model 2081C Conductivity Transmitter Menu Tree

Menu structure for the Model 2081C Conductivity Transmitter.

Model 3051 Pressure Transmitter Menu Tree

Menu structure for the Model 3051 Pressure Transmitter.

Model 3095C Level Controller Menu Tree

Menu structure for the Model 3095C Level Controller.

Model 4000 Oxygen Analyzer Menu Tree

Menu structure for the Model 4000 Oxygen Analyzer.

Model 8712C Mag Flow Transmitter Menu Tree

Menu structure for the Model 8712C Mag Flow Transmitter.

Model 9701 Mass Flowmeter Menu Tree

Menu structure for the Model 9701 Mass Flowmeter.

Model APEX Radar Level Gauge Menu Tree

Menu structure for the Model APEX Radar Level Gauge.

Model WC3000 Oxygen Analyzer Menu Tree

Menu structure for the Model WC3000 Oxygen Analyzer.

HART Communicator Messages

HART Communicator Message List

A list of HART Communicator messages and their descriptions.

Specifications and Ordering Information

Functional Specifications

Technical details on memory, power supply, and components.

Performance Specifications

EMC, humidity, operating, and storage limits.

Physical Specifications

Details on the display, keypad, and weight.

Ordering Information

Standard and optional product selections and model numbers.

Spare Parts

List of available spare parts and accessories.

CSA and FM Intrinsic Safety Approvals

Canadian Standards Association (CSA) Approvals

Intrinsic safety information for CSA certification.

Factory Mutual (FM) Approvals

Intrinsic safety parameters and inductance limits for FM.

Troubleshooting Communication Problems

Troubleshooting Common Communication Issues

Steps to diagnose and resolve communication problems.