To Next PageTo Next PageWhat to do if my Fisher Scientific Cooktop displays message E11?
If your Fisher Scientific Cooktop displays message E11, this indicates a locked rotor condition. In this case, you should call Technical Service for assistance.
What to do if my Fisher Scientific Cooktop displays message E12?
If your Fisher Scientific Cooktop displays message E12, it means there is a failure of the motor sensor. You should call Technical Service.
What to do if my Fisher Scientific 11100100H Cooktop displays message E02?
If your Fisher Scientific Cooktop displays message E02, it indicates a thermocouple short circuit. You should call Technical Service.
What to do if my Fisher Scientific 11100100H Cooktop displays message E01?
If your Fisher Scientific Cooktop displays message E01, this indicates that the thermocouple is not connected. You should call Technical Service.
General| Brand | Fisher Scientific |
|---|---|
| Model | 11100100H |
| Category | Cooktop |
| Language | English |
Alerts warn users of potential personal injury risks associated with equipment operation.
Specific safety warnings to prevent electrical shock and personal injury during use.
Details on temperature range, heat-up time, and temperature stability for solid ceramic tops.
Information on speed range, dial positions, estimated speeds, and flask capacity.
Specifies operating and storage conditions including temperature, humidity, and altitude limits.
Lists standards met for EMC and safety, and identifies the authorized EU representative.
Guidance on using the product only for its intended purpose to ensure safety.
Instructions for safely removing the unit from packaging and inspecting for shipping damage.
Steps for setting up the unit on a stable surface and connecting to a power source.
How to adjust the stirring speed using the dedicated control knob.
Instructions for adjusting the heating temperature via the control knob and display.
Guidance on safely heating vessels or sand baths and potential impact on the unit.
Procedures for cleaning the exterior surfaces of the hotplate.
Displays common error codes, their causes, and suggested solutions or when to contact service.
