Fisher CA-890 - Page 4

SPECIFICATIONS
POWER AMPLIFIER SECTION
Minimum RMS sine wave power per channel
within stated bandwidth at no more than stated 150 Watts
distortion and with 8-ohm load
Power Bandwidth 20 Hz — 20 kHz
Total Harmonic Distortion 0.02 %
I.M. Distortion 0.02 %
Speaker Damping >20
PREAMPLIFIER SECTION
Frequency Response
Phono (RIAA) +1 dB
Aux (20 Hz — 20 kHz) +1dB
Input Sensitivity and Impedance
Phono 2.5 mV/50 kQ.
VCR Tape Monitor 1,2 150 mV/50 kQ
Tuner/TV/CD/Aux art 150 mV/50 kQ.
i. Phono Max. Input Capability 140 mV
Parametric Equalizer
25 Hz — 800Hz +12dB
600 Hz - 20kHz +12dB
High Filter (Above 10 kHz) —6dB/Oct.
Subsonic Filter (Below 10 Hz) —12dB/Oct.
Loudness Contour (100 Hz/10 kHz) +8 dB/ +4 dB
Hum & Noise ({HF Short Circuit, A Network) [
Phono 80 dB
VCR/Tape Monitor 1,2 95 dB
Tuner/TV/CD/Aux 95 dB
GENERAL
Power Requirements (50Hz) 110/220V AC
Power Consumption 700 Watts
AC Outlets 2
Dimensions (W x H xD) 440 x 140 x 320 mm
Weight (approx.) 11.8kg
Because its products are subject to continuous improvement, Fisher Corporation reserves the right to modify
product designs and specifications without notice and without incurring any obligation.