GENERAL OPERATION: WIRELESS MICROPHONE
• Insert battery to the wireless microphone and make sure
battery polarity is correct
• Turn power switch on microphone to “ON”.
• Please extend the antenna on the speaker and make it
vertically upward for better reception.
• Adjust the microphone volume knob on the speaker to
desire volume
NOTE on microphone
• Ensure wireless microphones are operated within the
speaker’s effective distance at 30m,
• Keep 5-15cm distances between microphone and lips for
best performance
• LED indicator on microphone will turn red when power level
is low, please replace with new battery
• Only use the included wireless microphone in the speaker
package.
GENERAL OPERATION: WIRED MICROPHONE
• Insert the wired microphone to “MIC IN”
• Turn power switch on microphone to “ON”.
To Next Page
Loading...