Part 10 Installation
1. Installation place
● A place where there is enough room for installation and maintenance.(Refer to Chart 1)
● The ceiling is structurally sound to hold the Indoor Unit.
● A place that is well ventilated and the influence of weather is the least.
● A place that the airflow can reach every corners of the room.
● A place where the drain pipe can reach out easily.
FSK-124-184HF A > 280
FSK-244HF A > 260
FSK-364-484HF A > 330
>1000mm
>1000mm
>1000mm
>1000mm
Chart 2
outdoor
● Install the outdoor unit on a rigid base to prevent increasing noise level and vibration.
● Determine the air outlet direction where the discharged air is not blocked.
● In the case that the installation place is exposed to strong wind such as a seaside or high position, secure the
normal fan operation by putting the unit length wise along the wall or using a duct or shield plates.
● Specially in windy area, install the unit to prevent the admission of wind.
- 30 -
To Next Page
Loading...
