Need help?Do you have a question about the Fisherspas Fisher Five+ and is the answer not in the manual?
Ensures qualified installation, dedicated power circuits, RCD use, and cord safety.
Supervision of children and infirm persons, and preventing play with the appliance.
Advises on water temperature limits, servicing by technicians, and appliance proximity.
Maintain water level 50mm above skimmer to prevent pump damage from air locks.
Regularly check and maintain chemical water balance (pH 7.4-7.6) to prevent corrosion.
10/15A spas need weatherproof outlet; 32/60A spas require hardwiring by electrician.
Do not turn power on to the spa until it is completely filled with water.
Turn on power, ensure water circulates; switch off if not, refer to troubleshooting.
Maintaining correct pH (7.0-7.8) is vital for sanitiser efficiency and preventing corrosion.
Essential for safe water; chlorine is common, ozone aids but requires chlorine backup.
Maintains sanitiser (2.0-3.0 ppm), total alkalinity (90-110 ppm), and pH (7.4-7.6).
Addresses issues like unplugged cords, tripped breakers, or faulty power points.
Diagnoses low water level, air locks, or closed valves as causes for no water flow.
Covers issues like excess current, improper wiring, or water on electrical components.
Lists common problems like 'Will not heat', 'Water not clean', and error codes.
General| Shell Material | Acrylic |
|---|---|
| Cover | Included |
| Seating Capacity | 5 |
| Insulation | Full foam |
| Cabinet Material | Wood |
To Next Page
