EasyManua.ls Logo

Fisheye FIX User Manual

Default Icon
2 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
●本製品は水中撮影専用に設計れたンバーズです焦点距離が28mm
(35mm判換算)のズで使用た場合、倍率0.41、画角約168°の超広角撮影が可能です
●超広角撮影に加ドマ撮影に適た近距離かの合焦性能ます
●専用の花形フード付属。ーをに、ズの保護に役立
1.ハグ/ポーのネジにあわせて時計方向にネ
みます
2.取付け後、付属の六角レンドのネジを緩め、位置を調整
します。
シュアイ ジョン
UWL-28M52R
取扱説明書
特長
取付方法
使用上の注意
メンテナンス
ズのズーム位置が28mmでもやハグの種類にはケレが発生すがあその場合にはレが解消すズーム位置に
使用ください。
●撮影時は自然光または外部ロボやの使用をおすすめ内蔵ボでは光が回せん。
ボ使用時は発光部の位置にご注意ださい。発光位置にてはメージ内にゴーアが発生すがあます
ズに過度の衝撃や振動を与ないでさい破損や浸水の原因移動、運搬の際には必ずドームカバーおプをつけい。
ズを直射光下や真夏の車内な極端に高温にな場所に放置しないさいOグが変質浸水の原因ます
スに有機溶剤を含んだ薬品(ー等)を使用しないださい。レンズのコーグにージを与
ズを通絶対に太陽を見ないでい。
ズは適切な力で取付けださい。過度に締め付けすズまたはズポーを破損があ
●ポーズの間には「水」があを前提に光学設計さていの水の層もズの役目を果たいま撮影時にはポーレンズの間が水で
満たされてを確認ていただ泡なズ面やポー面に残ない装着ださ
ズ装着時に砂や異物を混入レンズを傷つけておそれがあ
ズ表面に水滴を残放置しないさい水滴のズ作用に表面のコーグを損傷さおそれがあ
ズをハグに装着したま直射光下に放置しないさいレンズ作用に撮影機材を熱損させておそれが
●使用後は流水でさいに海水での使用後は塩分を十分
に取ため、真水またはぬま湯に2〜3時間のつけ置き洗いをおすす
めします。ウジング取り外してくガミ
り取り外しありす。
ズ表面の水滴はブーで吹き飛ばスなの柔かい
布で表面をきれいに拭き取ださ
ズは乾燥た場所に保管ださ
●防虫剤や有機溶剤の影響のある場所での保管は避けい。
ズ構成
耐圧水深
倍率
ント
材質
重量
イズ
同梱品
5群5枚
60m/200Ft
0.41x
52mm
光学ガス、強化プラ耐腐食ア合金、ABS樹脂
526g(陸上)/165g(水中)
Φ126×D85mm(フード含む)
FIXバージズUWL-28M52R
リア ャッ
角レンチレンズフード固
ドームカバー
取扱説明書
Fisheye Co., Ltd.
International Distribution & Service
株式会社
171-0052東京都豊島区南長崎5-29-7TEL:03-5996-5637FAX:03-5996-7202
プターの過度な締め付けは、ハウグを破損さがあ
●本製品は強力なマグネを採用ています装着の際に指を挟まるなのケガにご注意ださ
●装着後、ドが画面に写込んでいないか確認ださい。込んでいる場合は再度フードの位置を調整ださい。
●不用意な落下脱落事故を防ぐため、付属のプをご使用さい
Question and Answer IconNeed help?

Do you have a question about the Fisheye FIX and is the answer not in the manual?

Fisheye FIX Specifications

General IconGeneral
BrandFisheye
ModelFIX
CategoryCamera Lens
LanguageEnglish

Summary

Key Features of the UWL-28M52R Lens

Ultra-Wide and Macro Capabilities

Offers 0.41x magnification and a 168-degree angle of view for ultra-wide shots, plus close-focusing for macro photography.

Lens Hood Functionality

Includes a dedicated petal lens hood to prevent flare and protect the lens.

Mounting and Installation Guide

Attachment Procedure

Align and screw the lens onto the housing/port clockwise, then adjust the hood position using the hex wrench.

Installation Precautions

Avoid over-tightening, be cautious of the magnet, check for hood obstruction, and use the provided strap.

Usage Precautions

Vignetting and Camera Settings

Adjust zoom position if vignetting occurs, as it depends on camera and housing type.

Lighting and Flash Usage

Recommend natural light or external strobes; avoid built-in flash and be mindful of strobe position.

Handling and Protection

Avoid shock, vibration, extreme heat, direct sunlight, and organic solvents to prevent damage.

Water and Cleaning Advice

Ensure water is between port and lens, avoid sand, and do not leave water droplets on the lens surface.

Sunlight Hazard Warning

Never look at the sun through the lens and avoid leaving the lens in direct sunlight to prevent heat damage.

Maintenance and Care

Rinsing and Soaking

Rinse with fresh water after use, soak in lukewarm water to remove salt, and remove lens from housing if stuck.

Drying and Storage

Blow off water droplets, wipe with soft cloth, and store in a dry area away from chemicals and fuels.

Technical Specifications

Lens and Housing Details

Specifies lens construction, depth rating, magnification, mount, and materials used in the lens and housing.

Physical and Package Information

Details weight, dimensions, and bundled items including lens caps, hex key, dome cover, and manual.