EasyManua.ls Logo

FishHunter Pro - SHALLOW WATER MODE

FishHunter Pro
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FISHHUNTER FISHFINDER CARE
Please operate this device where the temperature
is between -30ºC and 40º C (-2F to 104º F).
Extreme low or high temperature conditions
might temporarily shorten battery life or cause
the device to alter its behavior to regulate its
temperature.
Store the device where the temperature is
between -5ºC and 3C (23ºF to 86º F). Don’t
leave the device in your car, because
temperature in parked cars can exceed this
range.
Taking Care of the Sonar:
1. After retrieving the sonar from the water,
simply pull up the rubber skin with your
hands/fingers so that it is back to its original
place. Since the sonar is wet, it should be easy
to pull the skin up.
2. Next, rinse the sonar with fresh water
(especially if the sonar has been deployed in
salty water).
3. Make sure the 3 tiny stainless steel pads on
the bottom of the sonar are completely clean and
shiny, and do not have any salt residues on
them.

Other manuals for FishHunter Pro