2
Kula Quick Start
1. Set the controls • Set volume off and bass, middle and treble to center.
2. Plug in • Connect to an amplifier or PA with a ¼-inch instrument cable.
The batt light will flash once quickly to indicate it has switched on.
3. Tune up • Press the tuner button. When it’s on, the tuner mutes the output
signal. Press again to exit.
4. Turn up • Raise the volume and adjust the bass, middle and treble controls to your
liking.
USB Output Jack • If equipped, provides a USB 2.0-compliant digital audio output
for direct connection to a computer. All preamp controls continue to operate as described
and a battery is required when using this output.
To Next Page
Loading...
