4
Mic Blend Controls
Mic Blend • Rotate the thumbwheel towards neck to achieve full microphone
signal. Rotate fully towards bridge to achieve full pickup signal. The center de-
tent position will deliver an equal 50/50 blend of pickup/mic signals.
Mic Trim • For the best blend functionality, the Mic and undersaddle pickup
should be roughly the same output level. Because all guitars produce different
body volumes, we have added a Mic Trim control to allow you to optimize the
level of the mic for your guitar. Turn the blend thumbwheel all the way to pick-
up and listen to the pickup output level. Now turn the thumbwheel all the way
to mic and using a small flat-head screwdriver adjust the Mic level to match the
pickup level (see Fig. 1).
To Next Page
Loading...
