Fishman TRIPLEPLAY FC-1 Quick Start Guide

Host (TriplePlay USB Receiver Connected to FC-1)
This setup shows use of the FC-1 to host the TriplePlay USB receiver and send the wireless information from
your guitar to an external hardware device, such as a MIDI sound module.
1) Connect the TriplePlay USB receiver to your FC-1 with Fishman logo aligned to the right side of the pedal.
The pairing button should be accessible from this side when fully inserted.
2) Connect the 5-Pin midi out to the MIDI input on your Sound Module or other device. Settings on your
TriplePlay controller can be edited using the patch manager in your TriplePlay application. Consult the
complete online documentation for details.
midi
power
hold
loop
patch
+
patch
_
tuner
+
3
TriplePlay Reinitialization

Fishman TRIPLEPLAY FC-1 Specifications

General

Brand	Fishman
Model	TRIPLEPLAY FC-1
Category	Recording Equipment
Language	English