Fishman TriplePlay - Page 2

Examples of Parts Used on Two Popular Guitars
BE SURE TO REFER TO THE HARDWARE INSTALLATION GUIDE AVAILABLE ONLINE BEFORE INSTALLING TRIPLEPLAY
Stratocaster
®
Guitar
Controller option #1: Plastic controller mount with magnets attaches directly to body of guitar
Controller option #2: Plastic controller mount with magnets attaches to 90 degree end pin bracket for flat top
guitars
Pickup mount option #1: Use the #1 Pickup mounting pad on pick-guard after cleaning
Pickup mount option #2 for lower action guitars: Pickup mounted directly to the pick-guard after cleaning
NOTE: Use string spacer tool and mini-screwdriver to fine tune string gap.
Guitars with Tune-o-matic style bridges
Controller option #1: Plastic controller mount with magnets adhered to the body of guitar. This will work only if
the mounting location is relatively flat.
Controller option #2: Plastic controller mount with magnets adhered to the provided 100 degree end pin bracket
for arch top guitars
Pickup mount: Use either the Tune-o-matic Nashville or Vintage bridge bracket, whichever best fits your particular
mounting hardware. Place it below your bridge but above the adjustment knobs readjusting the action to the original
height before bracket was installed.
NOTE: Use string spacer tool and mini-screwdriver to fine tune string gap.
For detailed infomation or additional support please contact www.fishman.com/tripleplay
Stratocaster
®
is a registered trademark of Fender Musical Instrument Corporation. Fishman is not afliated with this brand.