Do you have questions? Call us @ 877.777.8693 Monday – Friday, 8am-5pm EST
2020 Fishmaster All Rights Reserved 2640 Byington Solway Rd, Knoxville, TN 37931 877.777.8693 fishmaster.com
c
DES-212
REV 1.0
(1) Leg Base (R)
(1) Leg Base (L)
(1) Seat Platform
(1) Foot Rest
(2) Seat Hinge Bracket
(1) Seat Cushion
(6) M10 x 22 Panhead Bolts
(6) 1.5" x 1/4" Deck Screws
(4) M10 x 45 Bolts
(4) M6 x 20 Button Head Bolts
(2) M8 Shoulder Bolts
(2) M10 Shoulder Bolts
(1) Snap Screw
(4) M6 Washers
(2) Roll Pins
(2) Allen Wrench
(1) Grease Packet
• Blue painter’s tape
• Black permanent marker
• Tape measure
• Cordless drill with 1/8" bit
• 45° chamfer bit
• Metric allen wrench set
• Phillips head screwdriver
• Rubber mallet
• Tube of 3M 5200
Marine Adhesive
• Thread Lock
Medium Strength
B. Deluxe Backrest Option:
(1) Backrest Frame
(1) Backrest Upholstery
(3) Stainless Steel Cup Holders
(4) M6 Washers
(4) M6 x 55 Shoulder Bolts
Verify all parts are included
before you begin.
Patent Pending
Gather additional necessary
tools and materials:
Also included if you purchased
A. Standard Grab Bar Option:
(1) Grab Bar
Pro Series Leaning Post Included Hardware Identification
1
4x
4x
6x
6x
2x
2x
1x
2x
4x
4x
PRO SERIES LEANING POST
INSTALLATION MANUAL
M10 x 22
M8
SHOULDER
BOLT
M10
SHOULDER
BOLT
M6 x 20
M6
M10 x 45
Roll Pins
M6 x 36
Snap Screw
M6 x 55
1.5" x 1/4"
CAUTION: If you are unfamiliar with your boat’s construction,
please seek professional advice before installing the leaning post.
As you plan to install the Fishmaster Pro Series Leaning Post,
keep in mind that drilling into the deck of the boat is needed in
order to safely secure the leaning post to the boat.
For added assistance when installing the leaning post, please
consider watching the installation video at: fishmaster.com
Or call us at 877-777-8693
!
TM
To Next Page
Need help?
General
