FITBENCH | 38 S. Main St. Unit 202. Oconomowoc, WI 53066 | FITBENCH.COM
GENERAL MAINTENANCE INFORMATION
Vinyl Top:
• To ensure prolonged life and proper hygiene of the FITBENCH top, the entire
FITBENCH vinyl top should be wiped clean with a damp cloth or nonabrasive
cleaning solution after every workout.
• Replace ripped or worn FITBENCH FLEX vinyl top immediately. Replacement
tops can be found at https://fitbench.com/view-all-products/.
• Keep sharp or pointed objects clear of the FITBENCH FLEX vinyl top.
• Always inspect hinge screws and anchor point screws under the top to make
sure they are snug/tight.
Decals:
• Inspect and familiarize yourself with any safety warnings or other user
information posted on each decal.
Screws:
• Inspect all screws for any loosening and tighten if needed. Go through a re-
tightening sequence periodically to ensure that all screws are tightened properly.
• Locktite can be used to improve screw’s security.
Check out www.fitbench.com/train or our YouTube page
(https://youtube.com/fitbench) for exercise ideas, follow along workouts,
and training plans.
To Next Page
Loading...