Why my FITFIU FITNESS Treadmill won't start?
Your FITFIU FITNESS Treadmill might not start because it is not connected to the mains electrical supply. Connect the unit to the mains electrical supply. Another reason could be that the safety tether is not in place. Place the safety tether in the correct location.
What to do if my FITFIU FITNESS MC-400 Treadmill display shows 'E7'?
If your FITFIU FITNESS Treadmill display shows 'E7', the safety tether is not in place. Place the safety tether in the correct location on the console.
How to fix belt slipping on FITFIU FITNESS MC-400 Treadmill?
If the belt slips on your FITFIU FITNESS Treadmill, it is likely because the belt is loose. Adjust the belt tension to resolve this issue.
What does 'E3' error mean on FITFIU FITNESS Treadmill?
If your FITFIU FITNESS Treadmill displays 'E3', it indicates that the electrical protection has tripped. To resolve this: * Check that the mains electrical supply meets specifications. * Ensure the drive belt isn't caught or obstructed. * Check all connections. * Inspect the motor or control circuitry for faults (often indicated by a burning smell) and replace parts as required.
What does error 'E6' mean on FITFIU FITNESS Treadmill?
Error 'E6' on your FITFIU FITNESS Treadmill indicates that the power supply protection has tripped. You should: * Check the mains electrical supply to ensure it meets the required specifications. * Check all connections. * Inspect the motor or control circuitry for any faults, such as a burning smell, and replace any damaged parts.
How to troubleshoot 'E1' error on FITFIU FITNESS Treadmill?
The 'E1' error on your FITFIU FITNESS Treadmill indicates a communication problem between the drive unit and the console. Check the connections between the console and the drive unit. If the connectors or wiring are damaged, replace them.
What to do if FITFIU FITNESS MC-400 shows error 'E2'?
If your FITFIU FITNESS Treadmill shows error 'E2', it indicates a drive unit or motor problem. Check the drive unit and motor connections. If the motor is damaged, replace it.
Why does my FITFIU FITNESS MC-400 Treadmill belt hesitate when I step on it?
The belt on your FITFIU FITNESS Treadmill might hesitate when stepped on due to insufficient lubrication on the running deck. Lubricate the running deck. Alternatively, the belt may be too tight, in which case you should adjust the belt tension.
How do I center the belt on my FITFIU FITNESS MC-400?
If the belt is not centered on your FITFIU FITNESS Treadmill, it's likely because the running belt tension is not even across the rear roller. Adjust the belt alignment to correct this.
General| Brand | FITFIU FITNESS |
|---|---|
| Model | MC-400 |
| Category | Treadmill |
| Language | English |
To Next Page
