Step 3: Attach baskets to the inlet outlet tube
The plastic baskets which are included in the liner box should be attached to the inlet outlet ports
from inside the pool. This will help prevent anything from closing over the ports. It is recommended
to soak the baskets in warm water first for easy installation.
Step 4: Insert framework long elbow tube into the upper-
right and lower-right corners of liner
The long and short elbow tubes should be placed in the width direction of the mattress side.
Carefully place the steel pipe to avoid scratching the liner, ensuring that the ends of the framework
long elbow and short elbow tube line up.
THE IPOOL INSTRUCTION MANUAL
Pool Set-Up
Please carefully read this instruction manual
before installing and using the iPool
12
To Next Page
Loading...
