Step 1: Follow illustrations 1 & 2 to lay out your inside ladder frame and
screw in the correct screw and washer. (Part #25)
Follow illustrations 3 & 4 to lay out your outside ladder frame and
screw in the correct screw and washer. (Part #25)
Step 2: Following illustrations 5 & 6, take the left and right handles and
insert onto the inside ladder frame. Follow illustration 7 and use the correct
screw and washer to fix in place. (Part #25)
THE IPOOL INSTRUCTION MANUAL
Ladder Set-Up
Please carefully read this instruction manual
before installing and using the iPool
23
5
1 2 3 4
6 7
To Next Page
Loading...
