Step 3: Attach baskets to the inlet outlet tube
From the inside of the pool liner (#35), attach the plastic baskets that are included in the liner box to
the inlet outlet ports. When your iPool is full, this helps prevent anything from closing over the ports.
For easy installation, first soak the baskets in warm water before attaching them to the inlet outlet
ports.
Step 4: Insert framework long elbow tube into the upper-
right and lower-right corners of liner
Place the long elbow (#2) and short elbow (#1) tubes in the width direction of the mattress side.
Carefully place the steel tubes to avoid scratching the liner, ensuring that the ends of the framework
long elbow and short elbow tube line up.
THE IPOOL INSTRUCTION MANUAL
Pool Set-Up
Please carefuy read is instruction manual
before instaing and using e iPl
12
To Next Page
Loading...
