THE IPOOL INSTRUCTION MANUAL
Pool Set-Up
Please carefuy read is instruction manual
before instaing and using e iPl
23
Step 20: Connecting a salt water system (optional).
1. First set up the filter pump according to the instructions in Step 18, and the pool heater according to the instructions
in Step 19.
2. Instead of attaching the final hose from the heater outlet to the
pool inlet, attach it to the saltwater system inlet, as shown. This
hose supplies filtered heated water to your saltwater system.
3. Attach the other end of hose that you connected to the salt
water system outlet to the pool inlet. This hose returns filtered
and heated salt water to your iPool.
Saltwater System
with Heater
To Next Page
Loading...
