THE IPOOL INSTRUCTION MANUAL
Pool Set-Up
Please carefuy read is instruction manual
before instaing and using e iPl
22
Step 19: Connecting a heater (optional).
1. First setup the filter pump according to the instructions in Step 18.
2. Instead of attaching the final hose from the filter pump outlet to the pool inlet,
attach it to the heater inlet, as shown. This hose supplies filtered unheated water
to your heater.
Heater Inlet
3. Connect a hose to the heater outlet.
Heater Outlet
4. Attach the other end of the hose that you connected to the the heater
outlet to the pool inlet. This hose returns filtered heated water to your iPool.
Note: For tips about heater installation and performing troubleshooting,
see Heater Installation Tips in the Troubleshooting section (page 33).
Complete Heater Connection
To Next Page
Loading...
