Fitness Reality 2809D.2

Need help?

Do you have a question about the Fitness Reality 2809D.2 and is the answer not in the manual?

Summary

Customer Service and Support

Customer Service Contact Channels

Provides multiple channels to contact customer service, including QR code, email, website, and phone.

Information Required for Service

Prepare name, address, phone, model, serial, part numbers, and proof of purchase for service.

Critical Safety Guidelines

Medical Precaution for Use

Consult your physician before using equipment if you have specific health conditions or ailments.

Product Weight Capacity

The maximum static weight capacity of this product is 800 lbs / 363 kgs.

General Safety Precautions for Operation

Follow all instructions, wear proper apparel, stop if feeling unwell, keep children/pets away.

Assembly Preparation and Tool List

Required Tools for Assembly

Lists necessary tools, including Allen keys, wrenches, screwdrivers, and rubber mallet.

Assembly Best Practices and Tips

Tips include hand-tightening hardware initially, reading steps thoroughly, and checking assembly.

Exploded View and Part Identification

Hardware Pack: Additional Items

Assembly Step 1: Base Frame Construction

Attaching Foot End Caps

Insert Foot End Caps into each side of the Base Frame as shown in Fig. A.

Attaching Rear Cross Bar and Mounting Plates

Attach Rear Cross Bar and Mounting Plates to Base Frame using specified bolts, washers, and nuts.

Assembly Step 2: Upright Frame Attachment

Attaching Gusset Plates to Base Beams

Attach four Gusset Plates to the Base Beams using specified bolts, washers, and nuts.

Connecting Upright Frames to Gusset Plates

Connect two Upright Frames to Gusset Plates, ensuring alignment, then tighten all hardware.

Assembly Step 3: Upper Frame Installation

Connecting Upper Frame to Upright Frames

Attach the Upper Frame to both Upright Frames using specified bolts, washers, and nuts.

Upright Frame Height Options

Note two height installation options (81-inch and 78-inch) for the Upright Frames.

Assembly Step 4: Weight Plate Holder Mounting

Mounting Weight Plate Holders

Attach the Weight Plate Holders onto the Upright Frames using specified bolts, washers, and nuts.

Assembly Step 5: Landmine Attachment Setup

Assemble Landmine Attachment

Assemble the Landmine Attachment using the provided knob.

Install Landmine Attachment Shafts

Insert Shafts into Gusset Plate and Base Beam, securing with clips.

Assembly Step 6: Safety Catches and J-Hooks

Installing Safety Catches

Insert Safety Catches into Upright Frames at desired level and secure with safety pins.

Installing J-Hooks

Insert J-Hooks into Upright Frames at desired level, ensuring they are at the same height.

Ensuring Secure Placement

Verify hooks of safety catches and J-hooks wrap around Upright Frames for secure locking.

Product Warranty Information

Warranty Coverage Details

Details warranty periods for structural frame, parts, and wearable parts for home use.

Warranty Exclusions and Limitations

Lists conditions not covered, such as improper installation, misuse, or acts of nature.

Ordering Replacement Parts

Information on how to order replacement parts, including contact email and required details.

Replacement Parts Request Form

This document is an owner's manual for the Fitness Reality Multi-Function Adjustable Power Rack Squat Stand, Model #2809D.2-081821.

Function Description:

The device is a multi-function adjustable power rack and squat stand designed for strength training. It allows users to perform various exercises, including squats, with the aid of J-hooks and safety catches. The power rack is designed for indoor use only and is intended to provide a safe and stable structure for weightlifting. It also features attachments for additional exercises, such as a landmine attachment and weight plate holders.

Important Technical Specifications:

Model Number: 2809D.2-081821
Maximum Static Weight Capacity: 800 lbs / 363 kgs
Components:
- Upper Frame (1)
- Left J-Hook (1)
- Right J-Hook (1)
- Left Long Safety Catch (1)
- Right Long Safety Catch (1)
- Base Beam (2)
- Gusset Plate (4)
- Mounting Plate (2)
- Weight Plate Holder (2)
- Shaft (2)
- Landmine Attachment (1)
- U-Bracket (1)
- Rear Cross Bar (1)
- Upright Frame (2)
- Elastic Cord (2)
- Cable Ring (4)
- Long Rubber Pad (2)
- Short Rubber Pad (2)
- Knob (1)
- Various bolts, washers, nuts, and end caps.
Assembly Tools Required (General): Metric Allen Key Set, Metric Wrench Set and Adjustable Wrench, Flat Screwdrivers, Phillips Screwdrivers, Rubber Mallet, Silicone Spray Oil.
Upright Frame Height Options: 81 inches and 78 inches (two installation options).

Usage Features:

Adjustable J-Hooks and Safety Catches: The J-Hooks (B & C) and Long Safety Catches (D & E) can be inserted into various holes on the Upright Frames (N) to accommodate different user heights and exercise requirements. The Safety Pin (14) is used to lock the safety catches in place.
Weight Plate Holders: The Weight Plate Holders (I) are attached to the Upright Frames (N) for convenient storage of weight plates, helping to keep the workout area organized.
Landmine Attachment: The Landmine Attachment (K) is designed to be inserted into the 1-inch holes on the Gusset Plate (G), allowing for rotational exercises.
Shafts for Resistance Bands: Two Shafts (J) are provided, which can be used to hold squat resistance bands, adding additional resistance to barbell squats (bands not included). One shaft can be inserted into the Gusset Plate (G) with the landmine attachment, and the second shaft can be inserted into any hole on the Base Beam (F).
Height Markings: The Upright Frames (N) have "U" shaped markings above some holes to help users identify and set the same height level across the frame for J-hooks and safety catches.
Safety Precautions: Emphasizes consulting a physician before use, wearing proper exercise apparel, stopping if feeling faint or dizzy, keeping children and pets away, ensuring correct assembly and tightened hardware, not operating if damaged, waiting 2 hours after eating, placing on a flat surface (mat recommended), keeping hands/feet away from moving parts, and adult supervision for children aged 12-18.

Maintenance Features:

Daily Maintenance: Inspect and securely tighten all nuts, bolts, rubber pads, and steel brackets. Replace worn or torn parts immediately. Keep liquids away from the console and avoid direct sunlight. Check machine leveling. Check tension and fitting on spring-loaded safety pins. Check adjustment knobs for secure tightening.
Weekly Maintenance: Inspect and securely tighten handlebars, seat, seat post, brake pads, and pedals. Use a damp cloth to clean dust and moisture from the equipment. Clean and wipe upholstery, rollers, track wheels, and walking belt. Check the equipment's metal/wood/upholstery structure frame.
Lubrication: Refer to the Owner's Manual for specific lubrication instructions.
Hardware Check: It is recommended to check all screws, nuts, and bolts on a weekly basis to ensure they are tight.
Customer Service: Provides detailed instructions for contacting customer service for damaged/defective products, questions, or replacement parts via QR code scan (direct email), email (service@paradigmhw.com), website (www.paradigmhw.com), or phone (Toll-Free: 1-844-641-7920, Monday-Friday PST). Users are advised to have their name, shipping address, phone number, model number, serial number, part number, and proof of purchase ready when requesting service.

Warranty Information:

Manufacturer's Limited Warranty: Paradigm Health & Wellness warrants the product to be free from defects in material and workmanship under normal home use.
Structural Frame: 1 year (frame, welds)
Parts: 90 days (covers, internal mechanism, tension, wheels, knobs, hardware)
Wearable Parts: 90 days (upholstery, foam, ball bearings, pulleys, belts, cables, shocks)
Exclusions: Improper installation, use beyond normal home use, vandalism, accidents, inadequate maintenance, animal damage, acts of nature, environmental conditions, staining from foreign substances, normal weathering, improper operation, alteration, handling, storage, abuse, or neglect.
Replacement Parts: Defective parts will be repaired or replaced free of charge. Replaced parts become the property of Paradigm Health & Wellness. Warranty is non-transferable and requires proof of original purchase.
Ordering Replacement Parts: Instructions for emailing a request form with receipt of purchase to service@paradigmhw.com, including required information (Owner's Manual, Model Number, Description of Parts, Part Number, Date of Purchase). Orders are processed within 3 business days.