What to do if my Fitness Reality TRE2500 says SAFE?
If your Fitness Reality Treadmill displays 'SAFE', it could be due to a few reasons. First, ensure that the Safety Tether Key is installed on the Computer. If that's not the issue, try restarting the power and retrying after 1 minute. If the problem persists, it may indicate a damaged Computer IC Board, and you should contact Customer Service.
What to do if my Fitness Reality Treadmill shows error Er5?
If your Fitness Reality Treadmill displays error code 'Er5', it could indicate several potential issues. First, restart the power and retry after 1 minute. Then, check the motor cable to ensure it is connected correctly and that the motor isn't blocked. Also, check the motor for any visible damage. Ensure the belt is well-lubricated. If none of these steps resolve the issue, it could indicate damage to the motor or power IC board, and you should discontinue use and contact Customer Service.
What does error Er1 mean on my Fitness Reality Treadmill and how can I fix it?
Error code 'Er1' on your Fitness Reality Treadmill suggests the computer is receiving an error signal. Try restarting the power and retrying after 1 minute. Also, ensure the sensor cable is perfectly connected. If the issue continues, the signal cable or computer IC board might be damaged, in which case you should discontinue use and contact Customer Service.
Why does my Fitness Reality TRE2500 show error Er7?
If your Fitness Reality Treadmill is showing 'Er7', it indicates that the Power IC board is not receiving a signal. Try restarting the power and retrying after 1 minute. Also, make sure the sensor cable is perfectly connected. If the problem persists, it could be due to a damaged signal cable or power IC board, in which case you should discontinue use and contact Customer Service.
What does Er3 mean on a Fitness Reality TRE2500?
Error code 'Er3' on your Fitness Reality Treadmill indicates low voltage. Restart the power and retry after 1 minute. Check if the input voltage is lower than expected and use the treadmill when the voltage is normal. If the problem continues, the signal cable or power IC board might be damaged, and you should discontinue use and contact Customer Service.
Guide to quickly initiate treadmill operation after initial setup.
Instructions for folding the treadmill for compact storage.
Procedures and tips for safely transporting the treadmill.
Guidance on how to adjust the treadmill belt for optimal performance.
How to apply silicone oil to the treadmill belt for lubrication.
Identification and resolution of common error codes displayed by the treadmill.
Overview of the warranty terms, coverage, and limitations for the product.
Information on how to order necessary replacement parts for the treadmill.
General| Brand | Fitness Reality |
|---|---|
| Model | TRE2500 |
| Category | Treadmill |
| Language | English |
To Next Page