FITT FORCE - Use and Maintenance Manual; Pack Content; Technical Details; First Use Instructions

5
FITT FORCE
USE AND MAINTENANCE MANUAL
Please read these instructions very carelly before using the product. Improper
use can lead to injury.
Thank you for purchasing FITT FORCE, a revolutionary product that will change the way
you do things! For more information visit: tt.com
Pack content* (A)
no. 1 hose with automatic couplings (1)
no. 1 multinction watering gun (2)
no. 1 tap connector, Ø 34mm and 26.5 mm (G 1” - ¾”) (3)
Technical details
• Internal Ø 14 mm approximately
• Optimum operating pressure: 2 - 4 bar
• Hose bursting pressure (at 20 °C): 23 bar
• Temperature of use: -30 °C +70 °C
• UV ray resistant
First use (B)
Remove FITT Force om its packaging and unwind it completely starting om the end
at the centre of the reel, as shown in the image, before connecting it to the tap.
Warnings
Safety warnings:
• Fitt Force is only intended for outdoor watering applications.
• Not suitable for use with hot water.
• Do not leave under pressure when not in use.
• Make sure that children cannot access Fitt Force unsupervised.
• Do not leave outdoor in eezing temperatures.
• Store indoor in winter.
• Before drinking om the hose, always let the water run for a few minutes.
• To avoid leaks at the coupling joints, regularly check that the couplings are tightly
screwed to the hose.
• Hose damage can be repaired as shown in the images. (C)
*1. “packaging is a registered community design”;
*2. The hose is a patented product.
GB