Need help?Do you have a question about the Fix&Go PRO and is the answer not in the manual?
General| Sealant capacity | 450 ml |
|---|---|
| Type | Tyre repair kit |
| Contents | Sealant bottle, compressor, accessories |
| Compressor power supply | 12V |
| Compressor cable length | 3 m |
Park vehicle safely, open kit, connect sealant tube to tire valve, and attach inflation tube to compressor and air tank.
Start engine, operate compressor to fill sealant, then inflate tire, using air release button for pressure adjustment.
Disassemble kit, apply speed sticker, drive for 10 mins, then park with engine running for sealant distribution.
Connect inflator nozzle, check pressure, and proceed based on reading: call assistance if low, inflate if sufficient.
Connect inflation tube to air tank and nozzle to tire valve, then inflate to the required pressure.
Use original refills. Press release button to remove old cartridge and firmly insert new one.
To Next Page
