FJGear FJ-401HUA User Manual

4 Ports USB 2.0 HDMI KVM Switch
Model: FJ-401HUA
User Manual
Product Port Diagram:
Switching Method:
1. Switch between any port by the button on the front of the product. Hotkey does not support linux,
Unix
2. Keyboard hotkey switch:
a. Double-click Scroll Lock (or Num Lock), in order to cycle.
b. Ctrl+Alt+port code, any port switch (this function should install software).
3. Through the mouse for any port switching or automatic scanning cycle switching (interval 10-60
seconds can be set arbitrarily). This feature is to install the software.

FJGear FJ-401HUA Specifications

General

Brand	FJGear
Model	FJ-401HUA
Category	Switch
Language	English

Summary

Switching Method

Button Switching

Switch between ports using the button on the product's front panel. Hotkey not supported for Linux/Unix.

Keyboard Hotkey Switching

Use keyboard shortcuts like double-click Scroll Lock or Ctrl+Alt+port code for switching.

Mouse and Automatic Scan Switching

Switch ports via mouse or automatic scanning cycles, adjustable interval 10-60 seconds.

Installation Instructions

Initial Setup and Operation

Connect devices, use buttons to switch. Wait for port light to stabilize before switching.

Software Installation and Usage

Install FJ-USBKVM software from CD-ROM. Use mouse/hotkeys (Ctrl+Alt+port code) for switching.

Hotkey and Scan Time Configuration

Configure hotkey codes and scan times via software settings for port switching.