RGB LED COLUMN
It indicates the bite and the direction
of the shing-line unwinding with
memory.
RED LED
Permanent light or ashing indicates
low battery (see more on page 5).
FC BUTTON (function)
Functions control (MUTE, night
position LED, see below).
SOUND
Acoustic indication of sh bite and
functions.
CONNECTOR
For swinger connection.
BATTERY REPLACEMENT
Unscrew the lock nut and open the
rear cover to replace the batteries.
Batteries: 2 pcs LR03 (AAA). Use
only high - quality alkaline or lithium
batteries (2x 1.5V).
SENSITIVITY REGULATION
■ Highest sensitivity on the right side
(the nest shing line movement).
■ Lowest sensitivity on the left side
(the longest shing line movement).
■ The “S” button can also be used to
choose the LED colour – see below.
BEEP HEIGHT ADJUSTMENT
■ Turn to the right to increase the
beep height.
■ Turn to the left to decrease the
beep height.
■ The „T“ button can also be used to
choose the LED brightness – see
below.
VOLUME CONTROL
■ Turn to the right to increase the
volume.
■ Turn to the left to decrease the
volume.
MAIN SWITCH
■ ON (the lever up).
■ OFF (the lever down).
MAIN LOAD-BEARING SCREW
1
1
2
8
7
3
9
4
10
5
6
11
7
2 8
4
9
5 10
6 11
ON
OFF
3
1
+420 731 115 151 | flacarp@tfe.cz | www.flacarp.com
BITE ALARM - CONTROL ELEMENTS
To Next Page
Loading...