Flaem Wi.Neb Go - User Manual

Questions and Answers

D
Daniel ElliottAug 3, 2025
What to do if my Flaem Wi.Neb Go Medical Equipment provides no mist?
- K
  Kyle RichardAug 4, 2025
  If your Flaem Medical Equipment is not producing mist, verify these points: Ensure there is medicine in the nebulizer. Check that the nebulizer nozzle isn't clogged. Confirm that the device's air inlet and accessories are correctly connected as shown in fig. 1. If using a power adapter, check that the device is connected to it and that the adapter is plugged into the electrical outlet.
M
Michael RojasAug 12, 2025
How to troubleshoot a Flaem Medical Equipment device that won't turn on with a power adapter or cigarette lighter cable?
- C
  Carlos KeithAug 12, 2025
  If your Flaem Medical Equipment isn't working with the power adapter or cigarette lighter cable, try these checks: First, make sure the power adapter is properly plugged into the electrical outlet and test the outlet with another device. Next, inspect the power cord and plug for any damage; do not use the device if they are faulty. Lastly, ensure the cigarette lighter plug is correctly inserted and that the fuse within the connection plug is intact.
M
Mrs. Heather LucasAug 25, 2025
Why is my Flaem Wi.Neb Go Medical Equipment producing low mist?
- T
  thomas82Aug 25, 2025
  If your Flaem Medical Equipment is producing low mist, consider these factors: Ensure the medicine isn't too cold; it should be near room temperature. Verify that there's at least 2ml of medicine in the nebulizer. When the device is running, always disconnect the 'L' jack before disconnecting the power adapter from the electrical outlet to prevent malfunctions.