Flama 4723FL - Cleaning and Maintenance

11
English
DESCRIPTION
1. Handles
2. Cooking plate
3. Fat collecon tray
4. Control box
5. Temperature control
6. Indicator light
OPERATING INSTRUCTIONS
Before rst use
Take the appliance and accessories out of
the box. Remove sckers, protecve lms,
or plasc from the appliance, except for the
technical data plate.
Before using the appliance for the rst
me, clean all removable parts with a damp
cloth. Never use abrasive products.
Place the fat collecon tray under the fat
drain.
Insert the control box on the temperature
control connecon into the cooking plate.
Plug the power plug into a wall socket.
When you turn on the appliance for the
rst me, it will produce a slight odor. This
odor is normal and only temporary, it will
disappear in a few minutes. Make sure the
area is well venlated.
Use
Place the grill on a level, stable, and
reproof surface in an appropriate locaon.
Lightly grease the cooking plate with a lile
vegetable oil.
Turn the temperature control to the highest
temperature and let the cooking plate heat
up for a few minutes unl the indicator light
turns o.
Use the temperature control to set the
desired temperature, depending on the
food you want to cook.
The thermostat constantly regulates the
temperature. During use, the indicator
light will turn on and o; this is normal and
means that the temperature is constantly
being adjusted.
Never use metallic or sharp objects with
the cooking plate, as this will damage the
non-sck coang.
CLEANING AND MAINTENANCE
WARNING!
Use the handles to transport the grill,
but only aer it has cooled completely to
avoid burns.
Damage risk!
Incorrectly cleaning the grill, the cooking
plate, the fat collecon tray, and other
parts may damage the grill.
Do not aempt to wash the grill in the
dishwasher.
Never aempt to wash the grill by
submerging it in liquid and do not use a
steam cleaner.
Do not use aggressive cleaning products,
such as alkaline or bleach-based cleaning
products and sharp or metallic cleaning
tools, such as knives, hard scrapers, or
similar.
Before cleaning, unplug the appliance from
the wall socket and wait unl it cools down
completely.
Never pour cold water on the hot plate as
this will damage the appliance and may
cause splashes of hot water.
Remove and empty the fat collecon tray
aer each use and wash in warm soapy