flamco Airfix D User Manual

Airx D
ENG | Installation and operating instructions –––––––––––––––––––4
DEU | Montage- und Bedienungsanleitung ––––––––––––––––––––6
NLD | Montage- en gebruikshandleiding ––––––––––––––––––––––8
FRA | Installation et mode d’emploi –––––––––––––––––––––––– 10
ITA | Istruzioni d’installazione e d’impo––––––––––––––––––––– 12
POL | Instrukcja montażu i obsługi ––––––––––––––––––––––––– 14
RUS | Инструкции по установке и эксплуатации ––––––––––– 16

flamco Airfix D Specifications

General

Series	Airfix D
Application	Potable water systems
Maximum Working Pressure	10 bar
Maximum Medium Temperature	70°C
Material (Vessel)	Steel
Type	Diaphragm expansion vessel
Connection	Threaded
Max. operating temperature	70°C
Suitable for Glycol	No
Approvals	WRAS
Material	Steel

Summary

General

Safety Requirements

Crucial safety guidelines for installation, operation, and potential risks associated with the vessel.

Installation

First Use

Steps for initial system setup, including pre-charge pressure adjustment and gas topping up.

Maintenance

Setting Pre-Pressure

Instructions to check and adjust the expansion vessel's pre-charge pressure after maintenance.

Opening Water Supply

Procedure for reintroducing water to the system after maintenance is complete.

De-installation

Vessel Weight Caution

Warning about the significant weight of a water-filled vessel during de-installation.

Hot Water Caution

Warning that the water inside the vessel may be hot during de-installation.

Environment

Disposal Compliance

Guidelines for environmentally sound disposal of the product in compliance with local regulations.