FLAMMA FV01 - Line In and Output Mode Configuration

5. Line in
Press to turn the line in function on/off. When line in is ON, FV01 can be used as a microphone
amplifier for the microphone in MIC IN. Alternatively, it can also be used as a traditional
stompbox.
●
6.Outputmode
The FV01 supports two different output modes.
Individual mode: The guitar signal will only go from GUITAR OUT and the microphone signal
will only go from XLR OUT.
Mixed mode: The guitar and microphone signal will be mixed and the mixed signal will go out
from both the GUITAR OUT and XLR OUT.
Change output mode: Power off the FV01. Press and hold the footswitch while powering on the
FV01. The color of the footswitch LED will indicate the current mode. Blinking Blue light
denotes individual mode while a blinking RED light indicates mixed mode.
●
●
Instructions
06
www.flammainnovation.com Shenzhen Flamma Innovation Co., Ltd
Press and hold the footswitch when the effect is on to enter Hidden menu. Press and hold the
footswitch again to quit hidden menu.
●