EasyManua.ls Logo

Flanders FFI Alpha 2000 User Manual

Flanders FFI Alpha 2000
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Flanders Filters - Foremost in Air Filtration
Toll Free: 1-800-637-2803
1
High Capacity Design
The Alpha 2000 High Capacity HEPA filter is avail-
able in a nominal 12” depth configuration. It is
designed for optimum performance and low operat-
ing costs in both new and replacement systems.
The Alpha 2000 saves space, energy, and material
and labor costs with 40% more media area than the
standard capacity Alpha Cell filter.
Save Space
Alpha 2000 HEPA filters operate at 500 fpm (2000
cfm for a 24” x 24” size) at 1.35 inch w.g. clean
pressure drop versus conventional Alpha Cell filters
that operate at 250 fpm and .80 inch w.g. clean
pressure drop.
Construction
A popular construction option consists of 16 ga.
galvaneal frames and moisture-resistant microfine
wet-laid fiberglass media folded over hemmed-
edge low amplitude corrugated aluminum separa-
tors. The filter pack is bonded to the frame by a fire-
retardant urethane elastomer to provide a rigid
leak-free assembly.
Save Energy
Alpha 2000 filters in a conventional HEPA filter
bank impose a lighter load on the fan when operat-
ed at conventional 250 fpm velocities during the life
of the filters. The Alpha 2000 99.97% and 99.99%
high capacity 24” X 24” X 11.5” filter has a clean
pressure drop of 1.0 inch w.g. at 1500 cfm, com-
pared to standard Alpha Cell filters with a clean
pressure drop of 1.50 inch w.g. at the same air flow.
Save Replacement Material and Labor
Costs
Savings are significant with high capacity Alpha
2000 filters. They operate at lower velocities and
provide life cycles up to three times the life of stan-
dard capacity filters. Savings are achieved in
replacement materials and labor costs as a result of
fewer filters.
Alpha 2000
High Capacity HEPA Filters
Bulletin PB1402-0107
Important Features
Efficiencies are 99.97% and 99.99% on 0.30
and 99.9995% on 0.12 micrometer particles.
High capacity Alpha 2000 filters can reduce the
filter bank size
• Corrugated aluminum separators stabilize the
moisture-resistant media pack (separator
style)
Available as a separatorless media filter with a
self-supporting media pack (*Pureform)
Available in a variety of frame materials in
gasket or fluid seal design.
0 125 250 375 500 625
Air Velocity (fpm)
Pressure Drop (in. w.g.)
Alpha 2000 Pressure Drop vs. Air Velocity
2.20
2.00
1.80
1.60
1.40
1.20
1.00
0.80
0.60
0.40
0.20
0.00
HEPA
ULPA
®
FOREMOST IN AIR FILTRATION
Question and Answer IconNeed help?

Do you have a question about the Flanders FFI Alpha 2000 and is the answer not in the manual?

Flanders FFI Alpha 2000 Specifications

General IconGeneral
BrandFlanders
ModelFFI Alpha 2000
CategoryAir Cleaner
LanguageEnglish

Summary

High Capacity Design

Save Space

Alpha 2000 HEPA filters operate at 500 fpm with a 1.35 inch w.g. clean pressure drop.

Construction

Describes filter construction with frames, media, separators, and bonding.

Save Energy

Alpha 2000 filters impose a lighter load on the fan, saving energy.

Save Replacement Material and Labor Costs

Important Features

Lists key features: high efficiency, reduced bank size, separator style, Pureform, frame options.

Separator or Separatorless

Pureform Advantages

Pureform offers more media area, longer life, reduced ownership cost, and media incinerability.

Underwriters Laboratories Qualification

UL 900 Class 1

Filters are UL 900 Class 1 rated, with exceptions for non-fire-retardant wood frames.

UL 586

UL 586 is typically required for Nuclear Grade HEPA Filters.

Banks and Housings

Surelock Filter Housings

Recommended for side-access applications, ensuring leak-tight seals via specific mechanisms.

Guide Specifications

General

Filters shall be extended media (separator or Pureform) and meet UL listing requirements.

Filter Construction

Details filter pack construction, media, separators, frame sealing, and frame materials.

Performance

Specifies minimum efficiency (99.97% on 0.30 µm) and scan-tested requirements.

Related product manuals